St. Cloud Roof Pros provides professional metal roofing in St. Cloud, MN for residential and commercial properties across central Minnesota. Metal is a good buy on the right plane here and a poor one on the wrong plane, and the deciding factor is how many times a panel has to end against something. Long clean slopes are what standing seam was invented for. A cut-up cottage roof is not.
The reason is movement. A steel panel of any length grows and shrinks with temperature across a range this climate delivers every year, and the granite it ends against does not move at all. So the joint where panel meets stone has to slip, with the metal free to travel behind surface-mounted counterflashing rather than a rigid bead of sealant asked to absorb the difference. Sealed tight, it tears itself apart.
Which is why we quote metal happily on garages, shops, rear additions, porch roofs and outbuildings, and quote it cautiously on a cut-up main house. On the simple planes it will outlast the owner, sheds snow off in slabs and costs less to maintain than anything else available. On the complicated ones you are paying premium prices for a lot of hand-formed pieces that each become a maintenance item.
Snow coming off metal is a real design decision, not an afterthought. Above an entry door, a walkway, a gas meter or a neighbor's driveway you want snow retention designed for the pitch and the load, mounted to the seam with clamps rather than screwed through the panel. We would rather add retention at the start than argue about a bent gutter and a broken step in February.
Do not put metal over failing sheathing, and be careful about putting it over shingles. Recover is possible with furring and a slip sheet, it is legitimate, and it also hides a deck nobody has sounded. On a house of this age we generally want the shingles off and eyes on the boards, because skip sheathing and standing seam clips are not a combination you want to discover halfway through.
Exposed-fastener ribbed panel has a place, and that place is agricultural and industrial. The gaskets under the screws are the wear item and they will want attention long before the steel does. On a house we will quote it if you ask, with the honest note that you are buying a twenty-year assembly with a forty-year finish on it.
Our licensed and insured team brings the right materials and equipment to every job — surface-mounted stainless counterflashing on sawn granite ashlar, a stainless termination bar bedded in two-part urethane, ASTM C615 dimension stone held to four tenths of a percent absorption, step flashing woven course by course against a stone return, a saddle cricket framed behind an upslope masonry chimney, base flashing carried eight inches up a parapet wall — and backs the work with a written workmanship warranty. We serve St. Cloud and nearby communities including Sartell, Sauk Rapids, Waite Park, St. Joseph.
What We Handle
Everything our metal roofing in St. Cloud covers
One crew, one point of contact, and the full range of metal roofing work in St. Cloud, MN. If it is on this list we do it in house rather than handing it to a subcontractor:
- metal roofing st cloud mn
- standing seam metal roof
- metal roof installation minnesota
- steel roof st cloud
- snap lock standing seam
- exposed fastener metal roof
- metal roof cost mn
- metal roofing over shingles
- agricultural metal roofing
- metal roof colors
- metal roof and snow
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our St. Cloud services.
Materials, equipment and how we do metal roofing
The difference between metal roofing that lasts and metal roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with surface-mounted stainless counterflashing on sawn granite ashlar, a stainless termination bar bedded in two-part urethane, ASTM C615 dimension stone held to four tenths of a percent absorption, step flashing woven course by course against a stone return, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every St. Cloud job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in central Minnesota means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do metal roofing outside St. Cloud
St. Cloud Roof Pros covers St. Cloud and the surrounding communities of central Minnesota. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Metal Roofing in Sartell, MN — Stearns and Benton counties, population 19,351
- Metal Roofing in Sauk Rapids, MN — Benton County, population 13,862
- Metal Roofing in Waite Park, MN — Stearns County, population 8,341
- Metal Roofing in St. Joseph, MN — Stearns County, population 7,029
- Metal Roofing in Princeton, MN — Mille Lacs and Sherburne counties, population 4,819
- Metal Roofing in Cold Spring, MN — Stearns County, population 4,164
Start on the St. Cloud Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why St. Cloud Chooses St. Cloud Roof Pros
- ✓The tape measure goes to the walls before it goes to the ridge. Linear feet of roof-to-masonry moves a St. Cloud bid further than the shingle line ever does.
- ✓Sawn granite will not take a raked reglet, so counterflashing here is surface-mounted and serviceable. We build it that way on purpose and hand you the service interval in writing.
- ✓Money goes into starter, step flashing, valley metal and hip and ridge first, and into the field laminate second. A premium shingle over tired metal is a good-looking roof with the old leak still under it.
- ✓Coating asphalt shingles is not something we do, and whole-roof sealing is not something we sell. The only sealant worth buying on most of these houses is the few dozen feet where metal meets stone.
The standards behind metal roofing
Quality here is not a matter of opinion — it is written down. The metal roofing work we do in St. Cloud follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every metal roofing project in St. Cloud gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in St. Cloud, or request a quote and we'll get right back to you.